Alba Minimalist Task Table Lamp

Precision-Engineered Minimalist Task Lighting

The Alba Table Lamp is engineered for focused task illumination with a clean, uncompromising design. The single-piece bent steel arm provides precise light positioning, while the conical shade directs light downward with minimal spill. The powder-coated matte white finish is applied via electrostatic deposition and cured at 180C for 20 minutes, resulting in a durable, scratch-resistant surface with uniform color. The weighted steel base ensures stability while maintaining a slim profile.

Technical Specifications

• Frame Material: 1.2mm cold-rolled steel (SPCC), single-piece bent construction, TIG welded joints, ground smooth
• Base Material: 3mm steel plate, 6 inch diameter, 0.5 inch height, weighted with 0.5 lb steel insert for stability (total base weight 1.5 lbs)
• Shade Material: 0.8mm steel conical shade (5 inch top, 7 inch bottom, 5 inch height), interior matte white powder coat for 92% reflectivity
• Finish: Matte white powder coating (RAL 9010), electrostatic deposition, 180C cure for 20 minutes, 60-80 micron film thickness, ASTM B117 salt spray tested > 500 hours
• Arm Joint: Friction hinge with stainless steel pivot, adjustable 0-90 degrees, 5 Nm holding torque
• Socket: E26 medium base, ceramic interior, rated 250V/660W, UL 496 certified
• Switch: In-line rocker switch on cord (SPST, 10A 250VAC, UL 61058 certified)
• Power: AC 120V 60Hz, 5-foot SPT-2 white PVC cord (18AWG), polarized plug
• Dimensions: 18 inches overall height, 7 inch shade width, 6 inch base diameter, 10 inch arm reach
• Weight: 3.5 lbs total
• Operating Temperature: 32F to 104F (0C to 40C)

Optical & Structural Performance

The conical shade provides a 45-degree beam angle with 85% light utilization efficiency (LUE), minimizing wasted light and maximizing task illumination. The matte white interior reflects 92% of visible light, ensuring even distribution without hot spots. The single-piece bent arm eliminates weak points at joints, with TIG-welded connections tested per AWS D1.1 (tensile strength > 400 MPa). The weighted base provides a 3:1 stability ratio (base weight vs. tipping force at maximum arm extension), tested per IEC 60598-1 clause 4.2. The powder coating is tested per ASTM D3359 (cross-hatch adhesion: 5B, no removal) and ASTM D4060 (Taber abrasion: CS-10 wheel, 1000g load, < 50mg loss after 1000 cycles).

Construction & Compliance

Electrical components UL recognized per UL 153 (portable electric luminaires). FCC certified for electromagnetic compatibility. RoHS compliant. The polarized plug ensures proper grounding orientation. The felt pad on the base protects furniture surfaces. The in-line switch is rated for 10,000 cycles. All steel components are recyclable. The lamp is designed for disassembly, with all fasteners accessible without specialized tools.

Bulb not included. Recommended: 60W equivalent warm white LED bulb (A19 or ST19 shape). Maximum bulb wattage: 60W incandescent or 15W LED.